Kostir háhraða línulegra hreyfistýringa-
1. The maximum speed of the high-speed slide rail is up to 10m/s. The wear part of the high-speed guide rail is made of high-carbon chromium bearing steel with strong wear resistance. After high-frequency induction heat treatment, it is precision ground. The surface hardness is above HRC60, so it can guarantee a longer life than the existing guide rail. Double-row bearings are used to make the sliding accuracy within ±0.02. In precision equipment, fine dust will also produce tolerances, causing product defects, so fine dust can not be tolerated. To avoid this, our super guide rail is equipped with a dust removal device on the shaft.
2. Rúllubygging, há-hraði og afar lítill hávaði
The existing guide rails use steel ball roller technology. Most of the steel balls roll in the ball circulation path of the track and the slider, so noise is caused and the movement speed is also limited. However, our dual-axis high-speed guide rails use double-row bearings. The bearings will roll completely. Therefore, the linear motion at the maximum rotation speed and the silent effect will be obtained.
3. Hægt er að stilla bilnákvæmni. Einnig er hægt að stilla samsetningarástand stýribrautarinnar og rennibrautarinnar með hnetunni á hlið rennibrautarinnar.
Nokkrir helstu eiginleikar -háhraða línulegra hreyfistýringa
1. Tæringarþol og ryðþol
The sliding block of the double-axis slide rail, the shaft support seat is made of aluminum alloy, and the surface is anodized after processing, which is not only beautiful in appearance but also corrosion-resistant, plus the shaft core is plated with hard chrome and does not rust, so it has Excellent anti-rust effect.
2. Auðvelt að setja saman
The double-axis slide rail products have been standardized and standardized. The design and selection of customers is not only convenient, but also very convenient and easy to assemble.
3. Auðvelt að skipta
The slide rail and the slide rail can be supplied separately. Customers can use it for a period of time, even if there is abrasion or damage, they are completely interchangeable.
4. Sléttur gangur og lítill hávaði
The linear bearing slides in contact with the shaft. So its operation is very smooth and low noise.
5. Góður efnahagslegur ávinningur
It has the characteristics of lightweight, corrosion resistance, interchangeability, and easy assembly. It can be used in various machinery and equipment to achieve maximum performance and achieve the maximum economic benefits of labor saving, light weight and automation.
6. Lágur kostnaður
The double-axis slide rail has simple structure, mass production, easy and quick product assembly. Compared with various types of slide rails, its cost is relatively low, and it has a price competitive advantage.